These modules can be used to add additional BST ports for supported Avaya BST digital telephones. The module is available in 16 and 30 port variants, referred to as the IP500 DS16A and IP500 DS30A respectively.
The modules use RJ21 connectors; 1 on the 16 port version, 2 on the 30 port version. For BST connections using RJ45 port, use the IP500 DS16B/30B modules.
This module is not supported in IP Office Subscription mode.
Feature |
Details |
Locales |
Supported in all IP Office locales. |
Minimum Software Level |
IP Office Release 7.0 minimum (BST only). Bin file = nadcpaV1.bin. |
Included |
Power supply unit (see below) and Expansion Interconnect cable. |
Power Supply |
The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module. |
Mounting |
The module is designed as a free-standing module that can be stacked on or under other IP Office modules. The module can be wall or rack mounted using the IPO IP500 RACK MNTG KIT V3. |
Dimensions |
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8". |
Weight |
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30A RJ21) |
Port LEDs |
•Green On = Phone detected. |
Module Center LED |
The center LED on all external expansion modules is used to indicate the overall state of the module as follows: •Red flashing = Module starting up/Loading firmware. •Red on = Error. •Green on = Module okay. •Green flashing = Module starting up/Loading firmware (IP500 DS16A/30A module only). |
Ports |
Description |
DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power supply unit supplied with the expansion module. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module. |
|
For IP Office Release 7.0, the modules support just phones requiring BST ports. |
|
9-Way D-Type socket. For Avaya use only. |
|
RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the Expansion Interconnect cable supplied with the module. |
|
Protective Ground point. Use of a protective ground is required for all installations, see Grounding (Earthing). Where the module is connected to analog extensions in another building, an IP Office Phone Barrier Box V2 (101V) is required at both ends, see Lightning Protection/Out-of-Building Connections. |
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item |
Variant |
Country |
SAP Code |
IPO 500 Digital Station 16A RJ21 UNIT ASSY |
RJ21 |
All |
700500699 |
IPO 500 Digital Station 30A RJ21 UNIT ASSY |
RJ21 |
700500698 |
|
IEC60320 C13 Power Cord |
CEE7/7 |
Europe |
700289762 |
BS1363 |
United Kingdom |
700289747 |
|
NEMA5-15P |
North America |
700289770 |
|
Mounting Kit |
IPO IP500 WALL MNTG KIT V3 |
All |
700503160 |
The following pin-out is used for the RJ21 ports.
1st RJ21 Connector |
2nd RJ21 Connector |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|