This process will replace the existing configuration.
•The configuration created must match the physical equipment in the IP Office system onto which it is loaded. Doing otherwise may cause the IP Office system to reset and experience other problems.
To load an offline configuration using IP Office Manager
1.Start IP Office Manager.
2.Select File | Offline | Open File....
3.Select the configuration file and click Open.
4.Check that the configuration settings are as expected and make any adjustments necessary.
5.Select File | Offline | Send Config....
6.Select the system and click OK.
7.Enter an administrator name and password and click OK.
8.Select when the new configuration should be loaded. Do not select the Merge option.