This document covers the programming of an IP Office Basic Edition system that can be done from the phones on that system. This is only supported from a limited range of phones:

ETR Series: ETR 18D, ETR 34D.

M-Series: M7310, M7310N, M7324, M7324N.

T-Series: T7316E, T7316.

1400 Series: 1408, 1416.

9500 Series: 9504, 9508.

The range of programming can be divided into the following categories:

System Administration
This programming can only be done on the first two extensions in the system. It mainly involves settings that affect all extensions on the system.

Centralized Programming
This programming can only be done on the first two extensions in the system. The user is able to select another extension number and then program settings for that other extension.

Telephone Programming
This programming is done from the extension whose settings are being changed. It does not cover daily operations, for example switching forwarding on or off.

 

System web management can access all the settings covered by telephone administration plus a wide range of additional settings not available through telephone administration. However, use of system web management is normally reserved for a system installer or maintainer only, due to the nature of the settings that are accessible.