Your phone has a programmable button to which the system administrator can assign a button function.

The following are the functions that can be assigned to the programmable buttons. .

 

•Account Code Entry: Feature 900
This function allows you to enter an account code prior to making a call or during a call.

•Active Line Pickup: Button 01, 68
This function allows you to answer a call on a particular line. It can be used if the call is ringing, held or already answered by another extension.

•Auto Dial - Intercom: Button 01, <Extension Number>
This function allows you to make a call to another specified extension. The button lamp will also indicate when that other extension is in use.

•Auto Dial - Other: Button 02, <number>
This function allows you to make a call using a number stored with the button. The number can be an internal number, an external number, an account code or any other number. The button can then be used when a number of that type needs to be dialed.

•Call Coverage: Feature 932
This function allows you to switch call coverage on or off. When on, any calls to you that ring unanswered also start ringing at your call coverage extension.

•Call Pickup: Button 01, 6, <Extension Number>
This function allows you to pickup a call alerting at a specified extension. Separate buttons can be created for each extension for which call pickup is required.

•Calling Group: Button 01, 71 to 74
This function allows you to call the calling group represented by the button. Putting a * in front of the group number allows you to page the group instead.

•Conference Drop: Feature 934
This function allows you to select and drop a call from a conference.

•Contact Closure 1: Feature 9*41
This function you to operate the system's contact closure 1 connection which might, for example, be connected to a door control. To use this, you must be a member of the system's contact closure group.

•Contact Closure 2: Feature 9*42
This function you to operate the system's contact closure 2 connection. To use this, you must be a member of the system's contact closure group.

•Do Not Disturb: Feature 85
This function allows you to switch do not disturb on or off.

•Hot Dial: Feature 935
This function allows you to dial a stored number without first going off hook or pressing the SPEAKER button.

•Hunt Group: Button 01, 771 to 776
This function allows you to call the hunt group represented by the button. Put * in front of the group number in order to page the group instead of calling it.

•Idle Line Pickup: Button 01, 8
This function allows you to seize a line if that line is idle. You can use this to access a line for which you do not have a line appearance button available on your phone.

•Last Number Redial: Feature 5
This function allows you to redial the last external number dialed.

•Loudspeaker Paging: Button 01, 70
This function allows you to make a page call to the extension configured as being connected to the loudspeaker equipment.

•Message Alert Notification: Feature 938
This function allows you to see the current state of other user's message waiting lamps. It is used in conjunction with other users for which you have Auto Dial - Intercom buttons.

•Night Service Button: #503
A night service button is used to switch night service on/off.

•Pickup Group: Button 01, 661 to 664  
This function allows you to answer a call being presented to any extension that is a member of the pickup group (1 to 4) configured for the button.

•Privacy: Feature 83
This function allows you to turn privacy on or off. When on, other extensions are not able to bridge into your calls.

•Recall: Feature 71
This function allows you to send a recall or hook flash signal.

•Saved Number Redial: Feature 67
This function allows you to save the number dialed during a call and to redial that number when idle. This can be used when the number dialed does not answer.

•Simultaneous Page: Button 01, *70
This function allows you to make a page call to both the loudspeaker extension and the extensions in first calling group, 71.

•Station Lock: Feature 936
This function allows you to lock and unlock your extension from being used to make calls. When selected, you are prompted to enter a four digit code after which the extension is locked. If the extension is already locked, use of this function prompts for reentry of the four digit code to unlock the extension.

•Station Unlock: Feature 937
This function can only be used by the first two extensions in the system. It allows the user to unlock any extension without needing to know the code that was used to lock that extension.

•VMS Cover: Feature 984
This function allows the you to switch use of voicemail coverage for your extension on or off.

•VMS Mailbox Transfer: Feature 986
This function allows you to transfer your current call to another extension's mailbox. Your current call is put on hold and you enter the target extension number to indicate the mailbox required.

•Wake Up Service: F#115
A Wake Up Service button can be assigned for the first extension on the system. Using this button, the extension user can set wake up calls within the next 24-hours period for any other extension.

•Voicemail Collect: Button 01, 777
Access your mailbox. If the button has an indicator, it is lit when you have any new voicemail messages.