Please enable JavaScript to view this site.

IP Office Basic Edition - M7310

> Phone Settings

Configuring SSL VPN Service

Scroll Prev Up Next More

Using the system administration option, it is possible to put the SSL VPN Service, which exists on <%IPOFFICE%> Basic Edition, in and out of service.

Note: The phones must be plugged into the first two ports of the first card on the IP500 V2.

1.With the phone idle and the handset on hook, press the FEATURE button.

2.Select System Admin > SSL VPN Service.  Alternatively, from the System Admin menu, you can dial # 7 7 5 (#SSL) to access the SSL VPN Service sub-menu.

2.Use the Next Item and Previous Item buttons to select the appropriate tunnel and press Enter.
The name and status of the selected tunnel is shown (1=Active, 2= Not Active).

3.Dial 1 or 2 to activate/deactivate the selected tunnel. You can also use the Next Data and Previous Data buttons to change the setting. You can still use the Next Item and Previous Item buttons to scroll through the list of remaining tunnels.  

If you press Remove, the selected tunnel is set to 'Not Active.'

5.Press Done to save your changes.

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2018 AVAYA
Issue 5.a.-
Thursday, April 26, 2018