Use this feature to be able to press a programmed button to prevent incoming calls for the extension from ringing (lights may still flash). You can still use the extension to make calls and to answer calls using line appearance buttons.

You need to program a button with lights. When the Do Not Disturb feature is on, the light is also on, indicating that the telephone will not ring.

Use Do Not Disturb when you do not want the auto attendant or the voice messaging system to transfer calls to you.

Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to the Hunt Group will skip your extension and ring immediately at the next available extension in the group.

To avoid missing calls when Do Not Disturb is not needed, turn it off.

Unanswered calls that are transferred from an extension with Do Not Disturb active, ring at that extension if they transfer return.

Users with VMS Cover turned on can activate Do Not Disturb to send all calls immediately to their voice mailbox.

Users with Call Coverage turned on can activate Do Not Disturb to send all calls immediately to the covering extension.

You receive a slow interrupted intercom dialling tone when Do Not Disturb is active.

 

To Manually Switch Do Not Disturb On/Off

1.Dial Feature 85.