Auto Dialing

Auto dialing uses numbers stored under one of the phone's programmable buttons. Whenever a number need to be dialed, pressing the button will dial the stored number.

To Use an Auto Dial Button

1.At dial tone or whenever you want to dial a number, press the programmed auto dial button.

2.The stored number is dialed.

To Create an Auto Dial Button (ETR 18D/ETR 34D Phone)

1.At the phone press Feature 00.

2.Program Extension: is shown on the display.

3.Press the button that you want to edit or enter a number between 03 to 80 to select a button. The current setting of the button is displayed.

4.To create an auto dial button to store an extension number press your first Intercom or Call Appearance button. For a button to store any other type of number press your second Intercom or Call Appearance button.

5.Enter the number for calls made using the button. To clear, press the MIC/HFAI key. An external number can include * and # and the following special characters:

6.The current setting of the button will now be AD-I (auto dial intercom) or AD-O (auto dial other) followed by the stored number.

•Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.