1.If already on a call, end the call by pressing Drop or put it on hold by either pressing Hold or pressing the button which the call is on.
2.Press an idle Intercom or Call Appearance button.
3.Dial the extension number or the code for the feature you wanted to access.
•To call an extension:
Dial the extension number. If you put a * in front of the extension number, the system will attempt to make a direct voice call.
•To call a group or attempt a call pickup:
Dial one of the numbers in the table below. If you put a * in front of the group number, the system will make a page call.
Feature |
Dial |
Summary |
Loudspeaker Paging |
70 |
Page the loudspeaker device attached to the system. |
Simultaneous Paging |
*70 |
Page both the loudspeaker device attached to the system and the extensions in calling group 71. |
Group Calling – Ring |
7 <Calling Group> |
Call the available extensions in one of the calling groups (1 to 4). |
Group Calling – Page |
*7 <Calling Group> |
Page the available extensions in one of the calling groups (1 to 4). |
Group Hunting – Ring |
77 <Hunt Group> |
Call the available extensions in one of the hunt groups (1 to 6). |
Group Hunting – Page |
*77 <Hunt Group> |
Page the first available extension in one of the hunt groups (1 to 6). |
4.You will hear the call progress. You can continue the call handsfree or switch to using the handset or headset (press the HEADSET button).
•If the other extension doesn't answer, press AutCB or Callback to have the system call you when that extension is next free.