You can assign a name to your extension, up to 15 characters long. The name is then displayed on the phone and also on other extensions when you make or receive calls.
To Change Your Extension Name (ETR 18D/34D)
1.At the phone press Feature 00.
2.Program Extension: is shown on the display.
3.Press Intercom 1.
4.Enter the extension name.
•Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1 second after press a button, the cursor will move onto the next space.
1 |
1!”$%&’()+,-./ |
2 |
2abcABC |
3 |
3defDEF |
||
|---|---|---|---|---|---|---|---|
4 |
4ghiGHI |
5 |
5jklJKL |
6 |
6mnoMNO |
||
7 |
7pqrsPQRS |
8 |
8tuvTUV |
9 |
9wxyzWXYZ |
||
* |
*:;<=>?@[\]^_` |
0 |
0 Space |
# |
# |
•Do not use punctuation characters such as #, ?, /, -, _ and , in the name. Start the name with an alphabetic character. Note that the name is case sensitive and must be unique.
•To remove the current name, press the MIC/HFAI key.
•Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.