Using the system administration option, it is possible to put the SSL VPN Service, which exists on IP Office Basic Edition, in and out of service. This feature is not available on ETR 6/ETR 6D phones.
Note: The phones must be plugged into the first two ports of the first card on the IP500 V2.
1.At the phone, press FEATURE 0 0, and then press the Intercom 1 button twice.
The System Administration menu appears.
2.Select SSL VPN Service using the NxPrc/PrPrc keys. Alternatively, from the System Admin menu, you can dial # 7 7 5 (#SSL) to access the SSL VPN Service sub-menu.
3.Use the Next Item and Previous Item buttons to select the appropriate tunnel and press Enter.
The name and status of the selected tunnel is shown (1=Active, 2= Not Active).
4.Dial 1 or 2 to activate/deactivate the selected tunnel. You can also use the Next Data and Previous Data buttons to change the setting. You can still use the Next Item and Previous Item buttons to scroll through the list of remaining tunnels.
•If you press Remove, the selected tunnel is set to 'Not Active.'
•Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.