Auto Dialing

Auto dialing uses numbers stored under one of the phone's programmable buttons. Whenever a number need to be dialed, pressing the button will dial the stored number.


To Use an Auto Dial Button

1.At dial tone or whenever you want to dial a number, press the programmed auto dial button.
2.The stored number is dialed.


To Create an Auto Dial Button (ETR 18D/ETR 34D Phone)

1.At the phone press Feature 00.
2.Program Extension: is shown on the display.
3.Press the button that you want to edit or enter a number between 03 to 80 to select a button. The current setting of the button is displayed.
4.To create an auto dial button to store an extension number press your first Intercom or Call Appearance button. For a button to store any other type of number press your second Intercom or Call Appearance button.
5.Enter the number for calls made using the button. To clear, press the MIC/HFAI key. An external number can include * and # and the following special characters:


Press to insert






Inserts a 1.5 second pause.




Send a hook-switch flash signal.




Stop dialing.

6.The current setting of the button will now be AD-I (auto dial intercom) or AD-O (auto dial other) followed by the stored number.
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place it back in the cradle.



© 2011 Avaya LLC
- Issue 4.d.-
08:27, 16 November 2011

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 14/02/2011