Ring Settings

Override Line Ringing

This option is new for IP Office Essential Edition - IP Office Essential Edition - Basic Edition 6.1 and higher+. For extensions where this is set, the extension's own ring pattern settings override any line ringing pattern setting.

 

1408/1416/9404/9408/9504/9508 Phone

1.At either of the first two extensions on the system, with the phone idle, press Admin.
2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When shown, press Select.
3.Use the up arrow up or down down arrow arrow buttons to scroll the display to Extensions. When shown, press Select.
4.Use the up arrow up or down down arrow arrow buttons to scroll the display to Override Line Ringing. When shown, press Select.
5.At the Extension: prompt enter the extension you want to edit.
6.The current setting is displayed.
7.Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
Alternatively use the left arrow left or right right arrow arrow icons to toggle through the settings or Default to return to the default setting.
8.Use the up arrow up or down down arrow arrow buttons to select another extension to adjust if required.
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, with the phone idle, press feature small Feature **config (ie. Feature **266344).
If the system has a system password set, it is requested. Enter the password.
2.The phone displays System Admin.
3.Dial #324. The phone displays Override Line Ringing.
4.At the Extension: prompt, enter the number of the extension to be programmed.
5.Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
6.Press the Next Item or Previous Item button for the next or previous extension respectively.
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.System Administration: is shown on the display.
3.Dial #324. The phone displays Override Line Ringing.
4.At the Extension: prompt, enter the number of the extension to be programmed.
5.Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
7.Press the Next Item or Previous Item button for the next or previous extension respectively.
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

 

 

© 2011 AVAYA
- Issue 3.b.-
11:29, 22 March 2011
(override_line_ringing.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 15/01/2011