Print

Configuring the base station

Procedure

  1. In IP Office Manager, open the Line menu for the desired IP Office control unit.
  2. Right-click any line and select New > SIP DECT Line.


  3. Configure Base Name and Base MAC Address. You do not need to configure the MAC address if only one base station is configured.


  4. Click the VoIP tab and configure the VoIP parameters. You can modify the default values if necessary.

    Note that the D100 supports only G.711 codecs.



  5. Press OK .
    noteNote

    On the System > LAN1 > VoIP tab, ensure that the SIP Registrar Enable check box is selected.

Next Steps

Configure at least one extension to associate with the SIP DECT line. See Configuring the extensions.