DHCP setting

View and edit (enable or disable) the DHCP setting using the following procedure.


  1. Access the Network submenu, navigate to DHCP Setting, and press the Select soft key.

    The handset display shows the DHCP setting. The default value is On.

    Press the Back soft key or the Off-Hook button to return to the menu list.

  2. Administrators can enable or disable DHCP by selecting either DHCP Enable or DHCP Disable using the Select soft key. If you did not enter the administrator password, you can only view the DHCP setting in read-only mode.

    After selecting a new setting, a confirmation message displays on the handset for three seconds.

    The handset emits a confirmation tone before returning to the menu list.