Factory settings

The following table lists the default factory settings for the D160 handset and the D100 base station. You can use multiple methods to reset the base station to factory default, but the preferred method is to use IP Office System Status Application. To determine the appropriate method to use in your situation, see Resetting the base station to factory default.

Item	Handset	Base station
Ringer Tone	Tone A	n/a
Ringer Volume	High	n/a
Ringer Mute	Off	n/a
Ear Speaker Volume	4	n/a
Hands Free Volume	4	n/a
Headset Volume	4	n/a
Range Alarm	On	n/a
DHCP	n/a	Enable
IP Address	n/a	192.168.1.100
Subnet Mask	n/a	255.255.0.0
Default Gateway	n/a	192.168.1.1
SIP Controller	n/a	192.168.1.1
Ping Reply	n/a	Enable
Destination Unreachable	n/a	Enable
DECT PIN ID	n/a	3100
Administrator Password	n/a	7828876
Login ID for the Base Station Web Management Interface	n/a	d100
Login Password for the Base Station Web Management Interface	n/a	d100
System Log Level	n/a	Level 2
Base DTMF Dial Output Time	n/a	100ms Note Continuous DTMF signaling is not available.