Print

Resetting the base station using the base station

Only use this method to reset the base station to factory default when the preferred and alternative methods fail. See Resetting the base station using before you attempt the following method.

Procedure

  1. Press and hold the Registration button located on the front of the base station and insert a pin into the Reset button hole also located on the front of the base station. Hold both buttons for five seconds.
    The base station resets the following parameters to the default values indicated:
    • IP Address: 192.168.1.100

    • Subnet Mask: 255.255.0

    • Default Gateway: 192.168.1.1

  2. You can now use the Base Station Web Management Interface to reset the base station. See Resetting the base station using the Base Station Web Management Interface.