Print

SystemStatusApplication

System Status Application (SSA) is a diagnostic tool for system managers and administrators to monitor and check the status of IP Office systems, locally and remotely. Avaya recommends using SSA as the preferred method for administering the D100 after the device is connected and registered to IP Office.

System Status Application shows both the current state of an IP Office system and the details of any problems that have occurred. The report consists of real-time events, historical events, status data, and configuration data to assist in troubleshooting and diagnoses. SSA provides real-time status, historic utilization, and alarm information for ports, modules, and expansion cards on the system.

The following sections outline the status pages relevant to D100 administration.

SIP DECT Base Stations status page

Click the plus [+] icon next to System in the side menu and select SIP DECT Base Stations to view a list of base stations connected to that IP Office.

This page contains detailed information about each base station and the related Line number, IP address, and firmware version. Highlight a base station to reveal the six following options. Note that you might have to scroll the page or expand the window to view all of the details and options:
  • Refresh: Refreshes the Base Station Status table.

  • Select: Opens a Base Station Status page that lists the details of the base station highlighted in the Base Station Status table (see the following section). Alternatively, you can double-click a base station name in the table.

  • Allow Registration: Enables the Registration mode on the highlighted base station.

  • Reset Base: Reboots the base station.

  • Reset Base To Default: Resets the base station to the factory defaults.

  • Reset Base Admin Pass: Resets the Administrator password to the factory default (7 8 2 8 8 7 6).

Base Station Status page

When you double-click a base station listed in the SIP DECT Base Stations status page, a new page opens with more detailed information for that base station. You can also click the plus [+] icon next to SIP DECT Base Stations in the side menu to expand a list of base stations. You need not navigate to the SIP DECT Base Stations status page to obtain the details for each base station.



noteNote

You might have to scroll the page or expand the window to view all of the details and options available for that base station. You must also highlight a handset for all of the options to become available.

The following options are available, in addition to those described for the SIP DECT Base Stations status page:
  • Refresh: Refreshes the Base Station Status page and the handset table.

  • Unregister Handset: Unregisters the selected handset from the base station.

  • Reset Handset: Resets the highlighted handset.

  • Unregister All Handsets: Unregisters all handsets from the selected base station.

  • Reset All Handsets: Resets all the handsets registered to the selected base station.