The Management Services service which runs on the server requires some initial configuration. This is performed the first time you login into it using either IP Office Web Manager or IP Office Manager. This is especially important for servers centrally managed using Avaya System Manager.

The following method does the initial configuration as part of the first login to IP Office Web Manager.

To perform initial configuration through IP Office Web Manager:

1.Log into IP Office Web Manager.

a.Enter https:// followed by the module's IP address and then 7070. Alternatively, enter https:// followed by the IP Office system address and from the menu click IP Office Web Manager on UCM.

b.Enter the user name Administrator and the password that was created for that user during ignition.

2.Web manager displays the initial configuration menu for the Management Services service. If this does not appear, click Solution. Most of the settings are automatically completed using the values you entered during module ignition.

3.Check the values are as expected:

Check that DHCP mode is set to Disabled.

If the module will be under centralized management from Avaya System Manager, select the Centralized Management checkbox. Enter the details required for Avaya System Manager.

4.Click Apply. The service is restarted using the values set in the menu. After the restart the browser is redirected to the normal web management menus.