Each control unit and expansion module requires a switched power outlet socket rated at 110-240V ac, 50-60Hz. Connection from that power outlet socket requires an appropriate locale specific power cord which is not supplied with the unit and must be ordered separately. Note that if the power cord includes an earth lead, the power outlet must be connected to a protective earth.
Power cords must not be attached to the building surface or run through walls, ceilings, floors and similar openings. Installation measures must be taken to prevent physical damage to the power supply cord, including proper routing of the power supply cord and provision of a socket outlet near the fixed equipment or positioning of the equipment near a socket outlet.
For locales not detailed below an appropriate power cord must be obtained locally.
Power Cord Type |
Power Outlet Plug Type |
Locales |
SAP Codes |
|---|---|---|---|
Earthed Power Cords (IEC60320 C13)
|
CEE7/7 (Schuko) |
Europe and South Africa. |
700289762 |
BS1363 |
Czech Republic, Ireland, United Kingdom. |
700289747 |
|
NEMA5-15P / CS22.2 No.42 |
North, Central and South America. |
700289770 |
•
Caution:
Connect the AC power supply only to the designated power port marked on the product, ensuring that the switched AC power socket used is near the equipment and easily accessible.
• Danger:
Never alter the AC cord or plug. If the plug does not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection increases the risk of electric shock.
