Please enable JavaScript to view this site.

IP500 V2/V2A IP Office Essential Edition

These ports are found on the rear of all IP Office control units and external expansion modules. The similar ports on external expansion modules are only used by Avaya.

The RS232 DTE ports can be used for a number of system maintenance processes. An asynchronous terminal program such as HyperTerminal is also required. Configure this for operation via a PC serial port, as follows:

Bits per second: 38400

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Settings | Emulation: TTY

 

DTE Cables
These cables are used for system maintenance and diagnostics under Avaya guidance. They can also be used for connection of RS232 serial terminal adaptor equipment to the IP Office control unit. The cable required depends on the IP Office control unit. This cable is a "Straight through DB9 female to DB9 male serial cable".

dte25_cable

IP Office 9-Way RS232 DTE Port

Signal

PC/Terminal Adaptor

3

rxReceive data

3

2

txTransmit Data

2

7

rxRTS (Request To Send)

7

8

txCTS (Clear To Send)

8

6

txDSR (Data Set Ready)

6

5

grndGround

5

1

txDCD (Data Carrier Detect)

1

4

rxDTR (Data Terminal Ready)

4

9

txRI (Ring Indicator)

9

 

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

Use of this site indicates acceptance of its cookies and analytics, and acceptance of the Avaya privacy policy.

© 2023 AVAYA
Issue 39.b.-
Tuesday, January 24, 2023