By default the IP Office will use internal music on hold by uploading a music file to the system. For IP500 V2 systems, you can load a file onto the System SD card prior to installing it in the IP Office.
The file must be of the following format and must be called holdmusic.wav.
Property |
Value |
Property |
Value |
File Type |
WAV |
Audio Sample Rate |
8kHz |
Bit Rate |
128kbps |
Audio Format |
PCM |
Audio sample size |
16 bit |
Length |
Up to 90 seconds. |
Channels |
1 (mono) |
|
|
To loading a music on hold file onto a System SD card
1.Rename the music file holdmusic.wav.
2.Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
3.If the IP Office is or will be configured for additional hold music files (up to 3 additional files), copy those files to the same location. The name of the additional files must match those specified in the IP Office system's configuration.