4-Port Expansion Card

This card is used to add 4 additional expansion ports to the control unit.

•Systems support up to 8 external expansion modules as standard. If fitted with an IP500 4-Port Expansion Base Card, up to 12 external expansion modules are supported.

4Port

•Supports
Provides 4 additional expansion ports for connection of external expansion modules.

•Supported Expansion Modules: The following external expansion modules are supported:

•IP500 Analogue Trunk Module

•IP500 BRI So Module

•IP500 Digital Station Module

•IP500 Digital Station Module A

•IP500 Digital Station Module B

•IP500 Phone Module

•Maximum per Control Unit: 1 - Right-hand slot 4 only.

•IP500 Trunk Card Support: .

•IP Office Modes: Not supported in IP Office Basic Edition modes.

•Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This cable must be used when connecting to expansion ports on the rear of a control unit.

•When connecting to expansion ports on an IP500 4-Port Expansion card, a supplied yellow 2 meter (6'6") expansion interconnect cable can be used in place of the supplied blue cable. 4 Yellow cables are supplied with the IP500 4-Port Expansion card.

port leds 02

•LEDs 1 to 8 are used for the expansion ports on the rear of the control unit. LEDs 9 to 12 are used for the card's own expansion ports.

Green	On	Expansion module present.
Red	Flashing	Initializing.
Red	On	Error.
Orange	Regular Flash	Base card okay.

Name	Description	SAP Code
IPO IP500 EXP CARD 4PT	Includes 4 yellow 2 meter interconnect cables.	700472889
IPO EXP CABLE RJ45/RJ45 2M YELLOW	Only for use with the 4-Port Expansion card.	700472871