Loading a Configuration onto a System SD Card

This process will replace the existing configuration.

•The configuration created must match the physical equipment in the IP Office system onto which it is loaded. Doing otherwise may cause the IP Office system to reset and experience other problems.

To load a configuration directly onto a System SD card

1.Rename the offline configuration file as config.cfg.

2.Shutdown and remove the System SD card. See Memory Card Shutdown/Removal.

3.Insert the SD card into the PC and display the card contents.

4.Open the /system/primary folder and replace the existing config.cfg file with the new file.

5.Reinsert the System SD card into the system.

6.Reboot the system. See Rebooting a System.