Locally Upgrade the SD System Card Using Manager

The following process can be used if you have physical access to the IP500 V2A control unit. This method can be used with a timed reboot, allowing the card upgrade to be done during normal operation hours followed by a reboot outside of normal operation hours.

If the card is being used for Embedded Voicemail, that service is not available while the card is shutdown.

•! WARNING: You must read and understand all upgrade pre-requisites before upgrading any system.  

To upgrade a System SD Card using a PC

1.Shutdown the System SD memory card and remove it from the control unit.

2.Follow the process for recreating the SD card. This process will overwrite the software files on the card with the files available to IP Office Manager. This process takes approximately 20 minutes.

•The process does not affect any current configuration file, Embedded Voicemail announcements and messages, or temporary SMDR data files.

3.When the recreate process has completed, reinsert the card into the control unit's System SD card slot.

4.Using IP Office Manager select File | Advanced | Reboot.

5.In the Select IP Office menu, select the IP500 V2A system and click OK.

6.Select the type of reboot that you want performed and click OK.

7.When the system is rebooted, as it restarts it will load the software files in the primary folder of the System SD card.