IP500 V2 安装

连接外部扩展模块

ip500 expansion connect 3d small

所有外部扩展模块应在控制单元加电之前连接至控制单元。请确保模块的连接顺序与计划或预建的配置匹配。

外部扩展模块通过扩展互连线缆连接至 IP Office 控制单元。各个模块均配有扩展连接线缆和电源。电源相应的区域特定的电源线必须单独订购。

每个外部扩展模块(WAN3 10/100 除外)均配有一条 1 米长 (3'3'') 的蓝色扩展互连线缆。连接位于控制单元背面的扩展端口时,必须使用此线缆。
连接 IP500 4 端口扩展卡上的扩展端口时,可以用一条 2 米 (6'6") 长的黄色扩展互连线缆来替代标配蓝色线缆。IP500 4 端口扩展卡配有 4 条黄色线缆。
WAN3 10/100 模块情况有所不同,该模块通过位于其正面的 LAN 端口连接至控制单元的一个 LAN 端口。IP500 和 IP500 V2 控制单元不支持此种类型的外部扩展模块。

 

安装需求

o 安装空间必须位于现有 IP Office 控制单元之上或之下。
o 开关式电源插座。
o 控制单元上的可用 EXPANSION(扩展)端口。
o 接地需求
o 功能接地
功能接地连接:
o 对于所有模块,建议采用。
o 对于模拟中继模块,强制采用功能接地连接。
o 保护接地
通过电涌保护设备的保护接地连接:
o 对于南非共和国的模拟中继模块,强制采用。
o 对于接至建筑物之外的 Digital Station(数字站)和 Phone(电话)模块,强制采用。
o 对于 Digital Station(数字站)V2 和 Phone(电话)V2 模块,强制采用。

 

所需工具

o 管理器 PC。
o 机架安装工具(可选)。

 

所需零件和设备

o 外部扩展模块
各个模块均配有适用外部电源和 1m 长的蓝色互连线缆。IP500 4 端口扩展卡配有 2m 黄色互连线缆,该线缆仅可与该卡配合使用。
o 电源的电源线
o 机架安装套件(可选)。
o 线缆贴标。

 

过程

1.外部扩展模块不应连接至已加电的控制单元。
2.如果需将 IP Office 系统安装在机架中,请将机架安装套件与扩展模块连接。
3.连接外部扩展模块的电源,但不要打开电源。
4.将扩展互连线缆从模块的 EXPANSION(扩展)端口连接至控制单元上的 EXPANSION(扩展)端口。请仔细记录所使用的端口,并将此详细信息添加至线缆标签和任何其它系统记录中。
ip500 expansion connect

 

 

© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(connecting_external_expansion_.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 10/03/2010