|
在安装过程中,建议在未连接任何网络的情况下启动 IP Office 控制单元。这可以确保 IP Office 默认采用一组已知的 IP 地址设置。
本部分描述将您的安装 PC 直接连至 IP Office 控制单元。
需求
• | o IP Office IP406 V2、IP500 与 IP500 V2 控制单元可以使用标准 RJ45-RJ45 LAN 线缆。 |
• | o IP412 控制单元需使用 RJ45-RJ45 LAN 交叉线缆。 |
|
直接连接采用默认配置的 IP Office 控制单元
1. | IP Office 控制单元 LAN 端口的默认地址为 192.168.42.1/255.255.255.0。如要直接连接 PC,将 PC LAN 端口的 TCP/IP 属性更改为以下设置: |
固定 IP 地址
|
192.168.42.203
|
子网掩码
|
255.255.255.0
|
默认网关
|
192.168.42.1.
|
• | 在将 PC 设置为可使用的 DHCP 客户端时,不建议执行固件升级等更多高级功能。 |
2. | 将 LAN 线缆从 PC LAN 端口连接至 IP Office 控制单元的 LAN 或 LAN1 端口。 |
3. | 检查 IP Office LAN 端口上的橙色 LED 灯是否已亮起。绿色 LED 也可能会闪烁,指示通过 LAN 连接传输的流量。 |
4. | 在运行 Manager(管理器)或 System Status Application(系统状态应用程序)之前测试连接: |
• | 选择 Start(开始)| Run(运行)并输入 cmd。 |
• | 在显示的命名窗口中输入 ping 192.168.42.1。结果画面应会显示 IP Office 的大量 ping 答复。这将确认管理器 PC 和 IP Office 之间的基本通信。 |
• | 如果没有 ping 答复,输入 ipconfig。结果画面应会列出上述必需的管理器 PC IP 地址设置。完成这些操作后,输入 exit 并检查线缆连接。 |
© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(connecting_the_manager_pc_(ip500).htm)
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
Last Modified: 10/03/2010