IP500 V2 安装 > IP500 卡安装

插入 IP500 卡

通过添加任何中继子卡或 IP400 遗留卡准备好各 IP 500 基卡后，可以将基卡插入控制单元。

•icon_warning 警告
•处理电路板时，应实行正确的防静电保护步骤。
•控制单元接有电源时，不得添加或卸除卡。

 

•所需工具
•o 5mm 平头螺丝刀。
•o 防静电腕带和接地点。

 

安装 IP500 卡

1.检查控制单元是否未加电。
2.使用平头螺丝刀，卸除位于控制单元正面的插槽盖，这些插槽用于安装卡。此插槽盖不再需要使用，但应保留，直到安装完成。
ip500 insert card
3.允许将卡靠在插槽底端，并开始滑入控制单元。卡插入一半时，通过尝试轻轻旋转卡，检查卡轨是否与插槽啮合。如果卡能转动，重新开始将其插入。
4.卡应能自如滑动，直到差不多完全插入。此时在卡的正面底部施力以将卡完全插入。
5.使用平头螺丝刀固定卡。

 

 

© 2010 AVAYA
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(ip500_card_installation2_2.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Use of this site indicates acceptance of its cookies and analytics, and acceptance of the Avaya privacy policy.

Last Modified: 10/03/2010