系统概述 > 控制单元卡

IP500 中继子卡

Mezzanine Card

大多数的IP500 基卡都可以与 IP500 子卡配接,以便支持到基卡的中继连接。

各块子卡均配备安装所需的支柱,以及安装完毕后贴在基卡正面用于标识子卡的标签。

IP500 组合卡是与中继子卡预先配接的,无法卸除中继子卡或更换其它类型的中继子卡。

IP500 模拟中继子卡

ip500 atm4 card 3d

此卡允许基卡支持 4 个模拟环路启动中继。

模拟电话端口不包括振铃电容。在要求此条件的情况下,应当通过包含振铃电容的主插座进行连接。
如果配备有 IP500 模拟中继子卡,在电源发生故障情况下,电话端口 8 连接到模拟中继端口 12。
最大数量:每个 IP500 控制单元 4 块。

IP500 BRI 中继子卡

ip500 bri card

此卡允许基卡支持最多 4 个 BRI 中继连接,各个中继提供 2B+D 数字信道。该款有 2 端口(4 信道)和 4 端口(8 信道)变体。

最大数量: 每个 IP500 控制单元 4 块。
S-Bus 连接:该卡可从 To 中继模式切换至 So 模式。此模式需要额外的端接电阻器和 ISDN 交叉线缆连接,请参阅 BRI 端口 (So)

IP500 PRI-U 中继子卡

ip500_pri

此卡允许基卡支持最多 2 个 PRI 中继连接。该卡有单端口和双端口变体。该卡可配置用于 E1 PRI、T1 夺位、T1 PRI 或 E1R2 PRI 中继。

最大数量:每个 IP500 控制单元 4 块。
IP Office 系统在每个配接的 IP500 PRI-U 端口上支持 8 个无许可的 B 信道。额外的 B 信道(不超过安装的端口和选定 PRI 模式的容量)需要添加至配置的 IP500 通用 PRI(额外信道)许可证。这些额外的信道根据在插槽 1 上方的端口 9 配置为服务中的额外信道来使用许可证。D 信道不受许可的影响。

 

 

© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(ip500_trunk_cards.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 10/03/2010