系统概述

墙式安装和机架安装套件

所有 IP Office 控制单元的设计均不需依靠支撑物。在具有外部扩展模块的系统上,控制单元和模块可堆叠安装。

使用附加的可选安装套件,一些系统可采取墙式安装或机架安装。

控制/扩展单元

墙式安装

机架安装

IP500 控制单元

tick

tick

IP500 V2 控制单元

tick

tick

IP500 外部扩展模块

tick

IP412 控制单元

tick

IP406 V2 控制单元

tick

IP400 外部扩展模块

tick

 

墙式安装

如果不使用任何外部扩展模块,可对 IP500 和 IP500 V2 控制单元进行墙式安装。除了适当的墙壁固定装置,还需要 IP500 墙式安装套件。

IP500 墙式安装套件(SAP 代码 700430150)
对 IP500 或 IP500 V2 控制单元进行墙式安装时,必须使用此套件。另需要适用于墙式安装的 4.5mm 固定装置。需为控制单元留出约 500mm 的间隙。
ip500 wall mount

 

机架安装

所有 IP Office 控制单元和外部扩展模块可安装到标准 19" 机架系统中。每个单元在机架内要求一个 2U 插槽空间。对于每个控制单元和外部扩展模块,机架安装要求 IP400 或 IP500 机架安装套件。

当 IP Office 系统进行机架安装时,必须考虑机架盒内的条件效果。例如,机架温度可能超过室温,将限制机架内的气流。每个 IP Office 单元的环境要求还适用于机架盒内部。

 

IP500 机架安装套件

rack mount

IP500 机架安装套件 (SAP 700429202)
此套件包含进行单个 IP500 V2 控制单元、IP500 控制单元或 IP500 外部扩展模块的机架安装所需的所有组件。其中包括用于将支架固定至模块的螺丝,以及用于紧固机架和线缆整理架中的模块的螺栓。

IP400 机架安装套件

ip400 rack mount

IP400 机架安装套件 (SAP 700210800)
此套件包含进行单个控制单元或扩展模块的机架安装所需的所有组件。其中包括用于将支架固定至模块的螺丝,以及用于紧固机架中的模块的螺栓。

隔离盒机架安装套件

barrier rack kit

隔离盒机架安装套件 (SAP 700293905)
隔离盒必须用于建筑外模拟电话分机.此支架允许最多 8 个 IP Office 隔离盒安装在机架上,并精简了支架中保护接地点的连接数量。使用超过 3 个隔离盒时,必须使用本套件,对于单个外部扩展模块,它支持最多 16 个隔离盒。

 

 

© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(rackmounting.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 10/03/2010