IP Office 安装: 其它流程 > So8 BRI 模块
|
|
在此例中,呼叫被发送到与 IP Office 系统的 S0 端口相连的 Polycom Viewstation 模块。
在 PRI 线路的 4 个输入数据信道上使用下列设置:
要将上述已配置的 PRI 线路上的来电视频呼叫发送到 SO8 模块,需要下列信息:
1. | 创建一个拨号短代码,它将 SO 端口作为其目的地线路组。对于此例,使用下列设置: |
2. | 创建一个来电路由,将适当的呼叫发送到该短代码。对于此例,使用下列设置: |
| 线路组: 95(识别在上面已配置的 PRI 线路的呼叫) |
要使 S0 端口上的视频设备向 PRI 线路发出呼叫,还需要一个短代码。
Polycom 视频模块设置
前例中使用的 Polycom 模块为 Viewstation 128、Viewstation 256 和 Viewstation MP。
该 Polycom 模块必须具有支持'标准 ETSI ISDN'(欧洲 ISDN)的软件,并将其“ISDN 交换机协议”设置设为'标准 ETSI Euro-ISDN'
以下是在测试过程中使用的设置:
|
|
• | Polycom View Station 512 MP。 |
|
• | ISDN 版本: IEUS v18:a00320 |
|
|
|
|
• | ISDN 交换机协议: 标准 ETSI Euro-ISDN。 |
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(s08_example2.htm)
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
Last Modified: 10/03/2010