其它流程 > SNMP

启用 SNMP 和轮询支持

为了能够让 SNMP 管理器发现并轮询 IP Office 控制单元,必须启用其 SNMP 代理并与 SNMP 管理器放在相同的读取社区中。

1.在管理器中,接收控制单元的配置。
2.在 Configuration Tree(配置树)面板中双击System(系统),并选择 SNMP 选项卡。
3.勾选SNMP Enabled(启用 SNMP)
4.在 SNMP Port(SNMP 端口)中,输入 IP Office SNMP 代理使用的 UDP 端口号,以侦听和响应 SNMP 流量。标准默认值为 161。
5. Community (Read-only)(社区(只读))中,输入设备所属的可进行读取的社区。将请求发送到设备时,此社区名称必须与 SNMP 管理器应用程序使用的名称相符。public(公共)社区通常用于建立通信,然后被更改(在 SNMP 代理和管理器终端)以确保安全性。
6.单击OK(确定)
7.将该配置发送回 IP Office 并选择重启。
8.IP Office 重启之后,SNMP 管理器应当能够找到控制单元。
9.控制单元的响应将包括控制单元类型和核心软件的当前级别等详细信息。

 

© 2010 Avaya LLC
15-601042 CHS Issue 21.e.-
14:05, 30 March 2010
(snmp.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 10/03/2010