Please enable JavaScript to view this site.

2410 Phone User Guide

> Changing Options

Changing Ringer Options

Scroll Prev Up Next More

The IP Office uses 'distinctive ringing' for different types of calls - a repeated single ring for internal calls, a repeated double ring for external calls and a single ring followed by two short rings for ringback calls. These options are fixed by the IP Office. The phone's own menus allow its ringer sound to be personalized so you can recognize it from other ringing phones.

 

To change the ringer sound:

You can choose from among eight different ring sounds. This alters the tone and style of ringing used by the phone, the ring pattern is still controlled by the IP Office according to the call type.  

Note

If you receive a call while selecting a ringer sound, you are automatically returned to the Call Handling screen.

1.To exit any other mode, press button_exit EXIT and then press any button-full below the display.

2.Press button-full Option.

3.Press button-left Ring Options and then press button-left Ring Pattern. A menu with the current ring pattern appears.

4.To select a ringing pattern, press either button_half_left or button_half_right or press a dial pad key between 1 and 8. You will hear the selected ringing pattern.

5.To hear the ringing pattern again, press button-full Play or re-press the dial pad key.

When you have selected a ringing pattern, press button-full Save. You will hear a confirmation tone and be returned to the Options menu.

If you want to return to the options menu without changing the ring pattern, press button-full Cancel.

 

To use the Message Lamp for ringing alerts:

1.To exit any other mode, press button_exit EXIT and then press any button-full below the display.

2.Press button-full Option.

3.Press button-left Ring Options and set Flash Message Lamp to Yes or No. When set to Yes, the Message lamp will flash when you receive a call.

 

To automatically show the call handling screen:

1.To exit any other mode, press button_exit EXIT then press any button-full below the display.

2.Press button-full Option.

3.Press button-full Ring Options and set Show Phone Screen to Yes or No. If set to Yes then, when you are setting up/using Speed Dial, Call Log, etc, you will be automatically returned to the call handling screen when you receive a call.

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2018 AVAYA
Issue 02.a.-
Thursday, April 26, 2018