Please enable JavaScript to view this site.

IP Office 500 V2/V2A IP Office Basic Edition

> Additional Processes > Defaulting the Configuration

Defaulting the Configuration Using the Reset Button

Scroll Prev Up Next More

Read and note the warnings regarding defaulting the configuration before using this process.

To default the configuration using the Reset button

1.On the rear of the control unit, press and hold the Reset button for between 10 to 30 seconds until the CPU led changes to flashing orange.

2.When the CPU LED changes to flashing orange, release the button.

If the CPU LED changed to red, keep the button held until the CPU LED changes to flashing green. Then release the button and reattempt the process once the CPU LED has returned to steady green.

3.Wait for the reboot to complete before performing any other actions.

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2022 AVAYA
Issue 38.e.-
Monday, February 28, 2022