The following processes erases the configuration held in the control unit's memory. That include both the current configuration being used in RAM memory and the backup configuration stored in non-volatile memory. Following this, the system restarts with a default configuration.

This process should be performed from a PC with a fixed IP address, directly connected to the control unit and with the system disconnected from any network. Following this process, the control unit's IP address defaults to 192.168.42.1.

Process Options

Defaulting the Configuration Using IP Office Manager

Defaulting the Configuration Using IP Office Web Manager

Defaulting the Configuration Using the Reset Button

Defaulting the Configuration Using Debug

Default the Configuration Using a System Phone

Defaulting the Configuration Using Boot Loader