These ports are found on IP Office control units. They are used for connection to IP LANs and IP devices.

All IP Office LAN ports are 10/100Mbps auto-sensing. The ports are full-duplex 10/100Mbps auto-sensing, MDI crossover ports. They form a managed layer 3 Ethernet switch.

The WAN port is not supported on systems running in IP Office Basic Edition mode.

The LEDs are used as follows:

Green: On = connected, Flashing = Activity.

Yellow: On = 100Mbps, Off = 10Mbps.

 

LAN Cables
These are CAT5 UTP cables for connection of various IP devices within the IP Office system.

lan_cable

IP Office

 

 

LAN

Pin

MDIX (Normal)

MDI (Crossover)

Wire

Standard/ Interconnect

Crossover

 

port_rj45

1

rxRx-A.

txTx-A.

White/Orange

1

3

port_rj45

2

rxRx-B.

txTx-B.

Orange/White

2

6

3

txTx-A.

rxRx-A.

White/Green

3

1

4

Not used.

Not used.

Blue/White

4

4

5

Not used.

Not used.

White/Blue

5

5

6

txTx-B.

rxRx-B.

Green/White

6

2

7

Not used.

Not used.

White/Brown

7

7

8

Not used.

Not used.

Brown/White

8

8

SAP Code:

LAN Cable - GREY: 700213481.
Standard straight LAN cable.

LAN Crossover Cable - Black: 700213473.
LAN crossover cable.