ETR Phones

ETR 34D and ETR 18D phones can be used for system and extension programming. The ETR 34, ETR 18, ETR 6 and ETR 6D phones cannot be used for system and extension programming.

You can access administration during a call if using the phone's handset for the call rather than the speaker. Once in administration, all buttons presses are used for administration only and do not affect the call.

System Administration

The following method is used to enter system administration mode. It is only supported on the first two extensions in the system.

1.At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

2.System Administration: is shown on the display.

Centralized Programming

The following method is used to enter centralized administration mode. It is only supported on the first two extensions in the system.

a.At either of the first two extensions on the system, press Feature 00 followed by two presses the first intercom or call appearance button and one press of the second intercom or call appearance button. Centralized Programming: is shown on the display.

b.At the Extension: prompt enter the number of the extension.

Telephone Programming

The following method is used to enter telephone programming mode. This mode can be used on any extension.

a.At the phone, press Feature 00.

b.Program Extension: is shown on the display.