Loudspeaker Extension

Loudspeaker paging systems allow you to broadcast a message over a large area. Use this feature to specify the extension port to which you connected the loudspeaker paging system.

The extension is used by the Loudspeaker Page and Simultaneous Page functions.

1408/1416/9504/9508 Phone

1.At either of the first two extensions on the system, press Admin.

•To do the above during a call, you may need to press the PHONE button to display the Admin soft key option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET buttons still affect the connected call.

2.Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press Select.

3.Use the up or down arrow buttons to scroll the display to Auxiliary Equipment. When highlighted, press Select.

•Alternatively, dial # and the system administration code.

4.Use the up or down arrow buttons to scroll the display to Loudspeaker Paging Ext. When highlighted, press Select.

5.Enter the extension number of the extension port connected to the loudspeaker paging system or Clear to return to the default setting (no loudspeaker).

•Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).

•If the system has a system password set, it is requested. Enter the password.

2.The phone displays System Admin.

3.Dial #617. The phone displays Loudspeaker Paging Ext.

4.Enter the extension number and then press Enter.

•Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.

•To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

2.System Administration: is shown on the display.

3.Dial #617. The phone displays Loudspeaker Paging Ext.

4.Enter the extension number and then press Enter.

•Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.

•Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.