If the system has been configured for support by an SSL VPN service link, you can turn the link on or off.

For information about how to configure and administer SSL VPN services, see the Avaya IP Office SSL VPN Solutions Guide. You can download the guide from http://support.avaya.com.

 

1408/1416/9504/9508 Phone

1.At either of the first two extensions on the system, press Admin.

To do the above during a call, you may need to press the key phone PHONE button to display the Admin soft key option. If you access phone administration during a call, only the key speaker SPEAKER, key mute MUTE and key headset HEADSET buttons still affect the connected call.

2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When highlighted, press Select.

3.Dial #775. The display will show SSL VPN Service.

4.The name of the first service is displayed and its current status. No Service is displayed if there are no services.

5.Use the up arrow up or down down arrow arrow buttons to scroll through the services if there is more than one service.

6.Use the Change button to change the status of the currently displayed service and then press Save.

Exit programming by pressing key phone PHONE. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, press feature small Feature **config (ie. Feature **266344).

If the system has a system password set, it is requested. Enter the password.

2.The phone displays System Admin.

3.Dial #775. The phone displays SSL VPN Service.

4.The name of the first service is displayed and its current status. No Service is displayed if there are no services.

5.Use the Next Item or Previous Item buttons to scroll through the services if there is more than one service.

6.To change the status of the currently display service, use the following option:

1 = Active/Assigned (the default).

2 = Not active/Not assigned.

To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

2.System Administration: is shown on the display.

3.Dial #775. The phone displays SSL VPN Service.

4.The name of the first service is displayed and its current status. No Service is displayed if there are no services.

5.Use the Next Item or Previous Item buttons to scroll through the services if there is more than one service.

6.To change the status of the currently display service, use the following option:

1 = Active/Assigned (the default).

2 = Not active/Not assigned.

Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.