ETR 34D and ETR 18D phones can be used for system and extension programming. The ETR 34, ETR 18, ETR 6 and ETR 6D phones cannot be used for system and extension programming.
The following method is used to enter system administration mode. It is only supported on the first two extensions in the system.
|1.||At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.|
|2.||System Administration: is shown on the display.|
The following method is used to enter centralized administration mode. It is only supported on the first two extensions in the system.
|a.||At either of the first two extensions on the system, press Feature 00 followed by two presses the first intercom or call appearance button and one press of the second intercom or call appearance button. Centralized Programming: is shown on the display.|
|b.||At the Extension: prompt enter the number of the extension.|
The following method is used to enter telephone programming mode. This mode can be used on any extension.
|a.||At the phone, press Feature 00.|
|b.||Program Extension: is shown on the display.|
© 2011 AVAYA
- Issue 3.b.-
11:29, 22 March 2011
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.
Last Modified: 15/01/2011