PBX Mode Call Routing

These settings are used for outgoing call routing on systems running in PBX system mode. They are applied to calls where the user goes off-hook and dials without selecting a line appearance button.

 

ARS Selectors
The ARS Selectors are used to create groups of lines. The same line can be in more than one group. These are then used as the destination for outgoing external calls.
Calls Out
The Dial Numbers table is used to match the number dialed by a user to a required ARS Select group number. When a match is found, an available line in that ARS Selector group is seized for the call.
External Dialing Prefix
Sets whether a prefix is used for external dialing and what the prefix should be.

 

Other Options

System Mode
Select whether the system should run in either key system or PBX system mode.
Operator Group
This group is the default destination for incoming calls for systems running in PBX system mode.

 

 

© 2011 Avaya LLC
- Issue 3.b.-
11:29, 22 March 2011
(pbx_mode_call_routing.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 10/01/2011