Dialing Restrictions and Permissions

Toll Call Prefix

Use this feature to indicate whether users must dial a 0 (for operator assisted calls) or 1 (for direct-dial calls) before the area code to make a long distance call or just the area code and number.

 

1408/1416/9404/9408/9504/9508 Phone

1.At either of the first two extensions on the system, with the phone idle, press Admin.
2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When shown, press Select.
3.Use the up arrow up or down down arrow arrow buttons to scroll the display to Restrictions/Permissions. When shown, press Select.
Alternatively, dial # and the system administration code.
4.Use the up arrow up or down down arrow arrow buttons to scroll the display to Toll Call Prefix. When shown, press Select.
5.The current setting is displayed.
6.Enter 1 or 2.
1 = 0 or 1 required before Area Code and Number (the default setting).
2 = Area Code and Number Only.
Alternatively use the left arrow left or right right arrow arrow icons to toggle through the settings or Default to return to the default setting.
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, with the phone idle, press feature small Feature **config (ie. Feature **266344).
If the system has a system password set, it is requested. Enter the password.
2.The phone displays System Admin.
3.Dial #402. The phone displays Toll Call Prefix.
4.The current system setting is displayed.
5.To change the setting, enter the required value:
1 = 0 or 1 required before Area Code and Number (the default setting).
2 = Area Code and Number Only.
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
6.Press the Next Item or Previous Item button for the next or previous extension respectively.
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.System Administration: is shown on the display.
3.Dial #402. The phone displays Toll Call Prefix.
4.The current system setting is displayed.
5.To change the setting, enter the required value:
1 = 0 or 1 required before Area Code and Number (the default setting).
2 = Area Code and Number Only.
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
7.Press the Next Item or Previous Item button for the next or previous extension respectively.
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

 

© 2011 Avaya LLC
- Issue 3.b.-
11:29, 22 March 2011
(tollcallprefix.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 16/01/2011