System Locale

The system locale setting affects a range of trunk settings relating to ring tones and other signals. Wherever possible the locale should be set to match the actual location of the system.

•	! WARNING This process will restart the phone system and disconnect all currently connected calls.

•	Changing the system locale will change the system language to the default for the selected locale. Any user display language settings are also reset to match the system language.

2.	Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.

3.	Use the up or down arrow buttons to scroll the display to System Parameters. When shown, press Select.

4.	Use the up or down arrow buttons to scroll the display to Set Locale. When shown, press Select.

5.	Use the up or down arrow buttons to change the setting until the require locale is displayed.

•

The possible locales are: Argentina, Australia, Bahrain, Belgium, Brazil, Canada, Chile, China, Colombia, Denmark, Egypt, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, India, Italy, Korea, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Oman, Pakistan, Peru, Poland, Portugal, Qatar, Russia, Saudi Arabia, Singapore, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United Arab Emirates, United Kingdom, United States and Venezuela.

7.	The phone will prompt for an Immediate Reboot ?. Press Confirm to reboot the system and use the new locale setting.

•	Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

1.	At either of the first two extensions on the system, with the phone idle, press Feature config (ie. Feature 266344).

•

6.	The phone will prompt for an Immediate Reboot ?. Press Enter to reboot the system and use the new locale setting.

•	To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

1.	At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

•

6.	The phone will prompt for an Immediate Reboot ?. Press Enter to reboot the system and use the new locale setting.

•	Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

© 2011 Avaya LLC
- Issue 3.b.-
11:29, 22 March 2011
(system_locale.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.