Date and Time

Changing the Date

The date held by the system and shown on display telephones can be changed. This should only be set on a system not using Network Time Synchronization.

 

1408/1416/9404/9408/9504/9508 Phone

1.At either of the first two extensions on the system, with the phone idle, press Admin.
2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When shown, press Select.
3.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Parameters. When shown, press Select.
Alternatively, dial # and the system administration code.
4.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Date. When shown, press Select.
5.The current date is displayed on MMDDYY format.
6.Enter the new system date in the format MMDDYY using the dial pad. For example 120409 is the date December 4th 2009.
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, with the phone idle, press feature small Feature **config (ie. Feature **266344).
If the system has a system password set, it is requested. Enter the password.
2.The phone displays System Admin.
3.Dial #101. The phone will display System Date.
4.Enter the new system date in the format MMDDYY using the dial pad. For example 120409 would be used to enter the date December 4th 2009.
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.System Administration: is shown on the display.
3.Dial #101. The phone will display System Date.
4.Enter the new system date in the format MMDDYY using the dial pad. For example 120409 would be used to enter the date December 4th 2009.
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

 

 

© 2011 AVAYA
- Issue 3.b.-
11:29, 22 March 2011
(changesystemdate.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 15/01/2011