Use these features to identify an extension to which a doorphone is connected. A doorphone is usually placed near an entrance, to screen visitors. You can connect up to two doorphones to the system.
•
The same extension cannot be assigned as an internal hotline extension and a door phone extension. Assigning a door phone extension as an internal hotline extension cancels the door phone setting.
•
You should not assign the first two extensions in the system as doorphones.
•
Switch off VMS coverage for the extension assigned as a doorphone extension.
•
To prevent outside calls from being made or received on the doorphone, use Line Assignment to remove all outside lines from the doorphone extension.
•
Automatic Line Selection for an extension assigned as a doorphone extension is automatically set to select intercom or call appearance buttons first.
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Use the up or down arrow buttons to scroll the display to Auxiliary Equipment. When shown, press Select.
Use the up or down arrow buttons to scroll the display to Doorphone 1 Extension or Doorphone 2 Extension. When shown, press Select.
5.
Enter the alert extension number. Alternatively use the left or right arrow icons to toggle through the settings or Clear to remove the current setting.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #604 for doorphone 1 or #605 for doorphone 2. The phone displays Doorphone 1 Extension or Doorphone 2 Extension respectively.
4.
At the Doorphone prompt the current setting is displayed.
5.
At the Extension prompt enter the alerting extension number. Press Remove to clear any current setting.
6.
Press the Next Item or Previous Item button for the next or previous extension respectively.
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #604 for doorphone 1 or #605 for doorphone 2. The phone displays Doorphone 1 Extension or Doorphone 2 Extension respectively.
4.
At the Doorphone prompt the current setting is displayed.
5.
At the Extension prompt enter the alerting extension number. Press Remove to clear any current setting.
7.
Press the Next Item or Previous Item button for the next or previous extension respectively.
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
left or right 
arrow icons to toggle through the settings or Clear to remove the current setting.
Feature **config (ie. Feature **266344).