System Language

The system language is defaulted to match the system locale. This process can be used to see and change the language setting if required. The language selection for an individual user can be set separately from that of the system.

1.	At either of the first two extensions on the system, with the phone idle, press Admin.

2.	Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.

3.	Use the up or down arrow buttons to scroll the display to System Parameters. When shown, press Select.

•	Alternatively, dial # and the system administration code.

4.	Use the up or down arrow buttons to scroll the display to Set Language. When shown, press Select.

6.	Use the up or down arrow buttons to change the setting until the require language is displayed.

•	The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese, Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean, Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.

7.	Press Select to use the currently displayed language.

8.	The phone will prompt for an Immediate Reboot ?. Press Confirm to reboot the system and use the new locale setting.

•	Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

1.	At either of the first two extensions on the system, with the phone idle, press Feature config (ie. Feature 266344).

•	If the system has a system password set, it is requested. Enter the password.

4.	Use the Next Data or Previous Data buttons to change the setting.

•	The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese, Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean, Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.

•	To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

1.	At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

4.	Use the Next Data or Previous Data buttons to change the setting.

•	The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese, Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean, Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.

•	Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

© 2011 Avaya LLC
- Issue 3.b.-
11:29, 22 March 2011
(system_language.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.