Ring Settings

Transfer Return Rings

Use this feature, which applies to all system extensions, to define the number of times a transferred call rings before it returns to the transferring extension. You can not set a transfer returned ring number for an individual extension.

For IP Office Essential Edition - IP Office Essential Edition - Basic Edition 6.1 and higher+, an extension's transfer return calls can be redirected using a Transfer Return Extension setting.
If you have a fax machine or an answering machine connected to the system, set Transfer Return Rings to a number greater than the number of rings at which the devices answers.
The setting 0 rings means "no transfer return".  This will mean that a caller who is transferred will not be returned even if their call is not answered.
The system does not start counting the number of rings for a transferred call (to determine when it goes to the transfer return extension if it is not answered) until the transfer originator hangs up. A ring is calculated to be 5 seconds long.
If you program Hunt Group Extensions, make sure this setting is four or more rings. This setting allows the call to continue hunting to other group extensions if it is not answered by the first group extension where it rings.
When a call is routed to an extension by transfer return, it alerts with the Transfer Return ringing pattern. The display indicates both the transferred caller's details and the original transfer destination.
If a phantom extension, door extension or paging extension is set as the transfer return destination, transferred calls will not follow transfer return and instead will continue ringing at the transfer destination.
Calls transferred by an auto attendant are not subject to transfer return.
When the transfer return extension has no available intercom buttons, the call will continue to alert at the original transfer destination until the transfer return extension becomes available at which time the transfer return will occur. This also applies for a busy analog extension or an extension in programming mode.
When an external call follows transfer return and there is a line appearance for the call, it alerts on the line appearance. If there is no line appearance the call shall alert on an intercom button.
When an internal call follows transfer return, it alerts on an intercom button.
If a call is transferred to an extension which is the transfer return destination for the transferring extension, the call remains ringing at the transfer destination.
Transfer return calls ignore Do Not Disturb, call forwarding, call coverage and coverage to voicemail.
Transfer return calls that are answered at the return extension are not logged even if the Called ID log answered calls is set to Active.

 

 

1408/1416/9404/9408/9504/9508 Phone

1.At either of the first two extensions on the system, with the phone idle, press Admin.
2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When shown, press Select.
3.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Parameters. When shown, press Select.
Alternatively, dial # and the system administration code.
4.Use the up arrow up or down down arrow arrow buttons to scroll the display to Transfer Return. When shown, press Select.
5.The current setting is displayed.
6.Enter the number of rings 0 (off) to 9. Alternatively use the left arrow left or right right arrow arrow icons to toggle the settings or Default to return to the default setting (4 Rings).
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, with the phone idle, press feature small Feature **config (ie. Feature **266344).
If the system has a system password set, it is requested. Enter the password.
2.The phone displays System Admin.
3.Enter the number of rings 0 (off) to 9. The default is 4 rings.
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.System Administration: is shown on the display.
3.Dial #105. The phone displays Transfer Return.
4.Enter the number of rings 0 (off) to 9. The default is 4 rings.
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.

 

 

© 2011 Avaya LLC
- Issue 3.b.-
11:29, 22 March 2011
(transferreturnrings.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.

Last Modified: 16/01/2011