Reboot a System Using IP Office Manager

To reboot a system using IP Office Manager

1.Using IP Office Manager, select File | Advanced | Reboot.

2.Use the Select IP Office menu to locate and select the IP Office system. Enter a valid user name and password.

3.The type of reboot can then be selected.

•Reboot
Select when the reboot should occur.

•Immediate
Reboot the system immediately.

•When Free
Reboot the system when there are no calls in progress. This mode can be combined with the Call Barring options.

•Timed
The same as When Free but waits for a specific time after which it then wait for there to be no calls in progress. The time is specified by the Reboot Time. This mode can be combined with the Call Barring options.

•Reboot Time
This setting is used when the reboot mode Timed is selected. It sets the time for the IP Office reboot. If the time is after midnight, the IP Office's normal daily backup is canceled.

•Call Barring
These settings can be used when the reboot mode when When Free is selected. They bar the sending or receiving of any new calls.

o! WARNING: This option also bars the making of emergency calls. Therefore, it should be used with caution.

4.Click OK.