Defaulting the Configuration

The following processes erases the configuration held in the control unit's memory. That include both the current configuration being used in RAM memory and the backup configuration stored in non-volatile memory. Following this, the system restarts with a default configuration.

This process should be performed from a PC with a fixed IP address, directly connected to the control unit and with the system disconnected from any network. Following this process, the control unit's IP address defaults to 192.168.42.1.

For IP Office Release 7.0 and higher, IP500 V2 systems using IP Office A-Law or IP Office U-Law System SD cards  default to IP Office Basic Edition mode. Loading the configuration, switches IP Office Manager to simplified view. To change the system back, see Changing the System from Basic Mode.

Process Options

•Defaulting the Configuration Using IP Office Manager

•Defaulting the Configuration Using IP Office Web Manager

•Defaulting the Configuration Using the Reset Button

•Defaulting the Configuration Using Debug

•Defaulting the Configuration Using Boot Loader