The initial configuration menus appear the first time IP Office Manager connects to a new or defaulted system.
•For an existing system, this menu can be rerun by selecting File | Advanced | Initial configuration in IP Office Manager or Actions | Service Commands | Initial Configuration in IP Office Web Manager.
To start the initial configuration using IP Office Manager:
1.Having connected to the new system, you are prompted to change the default passwords.
•Administrator Password: This password is used for access to the system's telephony configuration.
•Security Administrator Password: This password is used for access to the system's security configuration. Note that by default the administrator password above can also be used for security configuration.
•System Password: This password is used for system upgrades using IP Office Manager and can also be used for connecting System Monitor.
2.Enter the new passwords and click OK.
3.The Initial Configuration menu prompts you for a number of key settings.
Setting |
Description |
|---|---|
System Mode |
•For a normal system select IP Office Subscription. •If the system is going to be used as an expansion in a Server Edition network, select Server Edition Expansion - Subscription. |
System Name |
Used to help identify and access the system. |
Retain Configuration |
This option appears if this menu is rerun on an existing system. If selected, the system attempts to retain as much of the configuration as is compatible with the other selections made in this menu. |
Locale |
This sets a range of settings to match the telephony requirements of that selected country. It also sets the default language for the system and all users. |
Default Extension Password |
This password is used for the initial registration of IP extensions. |
Subscription System Details: The following settings are shown if the System Mode is set to IP Office Subscription. Enter the details from the email provided after the System SD card was registered. See System Subscription. |
|
System ID |
This field shows the ID number of the System SD card installed in the system. Check that this matches the System ID shown in the subscription email. |
Customer ID |
Enter the customer ID provided in the subscription email. |
License Server |
Enter the address provided in the subscription email. |
The following settings are used to configure the systems IP address settings: |
|
Public LAN Interface |
This option performs two roles: a.It is used to display the IP address settings of each of the system's two LAN ports. LAN1 matches the port on the control unit labeled LAN, LAN2 matches the port labeled WAN. Check that these settings are as required. b.The final selection is used to set which of the ports is connected to the customer network that should be used for external internet access via the customer firewall or similar. The Gateway address of that LAN is then added to the system's IP routes as the default IP route. |
IP Address |
Set the IP address of the system on the currently selected LAN interface. |
IP Mask |
Set the IP address mask of the system on the currently selected LAN interface. |
Gateway |
Set the IP address of the external router. |
The following settings are shown if the System Mode is set to Server Edition Expansion - Subscription. |
|
Server Edition Primary |
Enter the IP address of the primary server on the Server Edition Network to which the server is being added as an expansion system. |
Server Edition Secondary |
Enter the IP address of the secondary server on the Server Edition Network to which the server is being added as an expansion system. |
WebSocket Password |
Enter the password to be used for the connect to those other servers. |
4.Click Save. The new configuration is opened in IP Office Manager.
5.This configuration has not as yet been saved to the system. Either:
•Continue the basic configuration using the following sections of this chapter and then save the configuration when finished.
•Save the configuration as it currently is. This may cause the system to reboot, the save menu will indicate if that is required. After saving the configuration, reload the configuration and continue with configuration.
•Note: Because the passwords have now been changed from their defaults, you are prompted to enter the new password when saving.