Please enable JavaScript to view this site.

IP Office 500 V2/V2A IP Office Basic Edition

IP500 Phone modules can be used to add additional PHONE ports to an IP Office system. The module is available in 16 and 30 port variants, referred to as the IP500 Phone 16 and IP500 Phone 30 respectively.

ip500 phone30 3d

Feature

Details

Locales

Supported in all IP Office locales.

Minimum Software Level

IP Office core software level 2.1(36) minimum. Bin file = dvppots.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office modules. The module can be wall or rack mounted using the IPO IP500 RACK MNTG KIT V3.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".

Weight

Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)

Module Front

ip500_phone30_front

Module Center LED

The center LED on all external expansion modules is used to indicate the overall state of the module as follows:

Red flashing = Module starting up/Loading firmware.

Red on = Error.

Green on = Module okay.

Module Rear

ip500_ds30_rear

Ports

Description

DC I/P

DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power supply unit supplied with the expansion module. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module.

DTE

9-Way D-Type socket. For Avaya use only.

EXPANSION

RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the Expansion Interconnect cable supplied with the module.

PHONE

RJ45 socket. Used for connection of analog phones. Intended for two-wire analog phones. For connection to 4-wire analog phones connection should be via a master socket with ringing capacitors.

If connected to an out-of-building extension, the connection must be made via additional IP Office Barrier Boxes in addition to the buildings primary protection. The module must also be connected to a protective ground.

earth symbol

Protective Ground point. Use of a protective ground is required for all installations, see Grounding (Earthing). Where the module is connected to analog extensions in another building, an IP Office Phone Barrier Box V2 (101V) is required at both ends, see Lightning Protection/Out-of-Building Connections.

Part Codes and Related Equipment

All expansion modules are supplied with a base software level and should be upgraded to match the core software of the control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.

Item

Variant

Country

SAP Code

IPO IP500 EXP MOD PHONE 16

16 Ports

All

700449507

IPO IP500 EXP MOD PHONE 30

30 Ports

All

700426224

IEC60320 C13 Power Cord

plug_ie60320_c13

CEE7/7

Europe

700289762

BS1363

United Kingdom

700289747

NEMA5-15P

America

700289770

Mounting Kit

IPO IP500 WALL MNTG KIT V3

All

700503160

IPO PHONE BARRIER BOX (101V) RHS

All

700385495

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2022 AVAYA
Issue 38.e.-
Monday, February 28, 2022